Rozinante Cabin Rebuild

This is the place to post your ideas, thoughts, questions and comments as relates to general boatbuilding and reconstruction techniques and procedures (i.e. recoring, epoxy, fiberglass, wood, etc.)
Post Reply
Rozinante
Bottom Paint Application Technician
Posts: 10
Joined: Sun Feb 15, 2009 4:29 pm
Location: Cotuit, MA

Rozinante Cabin Rebuild

Post by Rozinante »

Apparently I've got questions on all aspects of this project. I have the cabin gutted and sanded with 36 grit. I plan to make things down below as cozy, wooden and as LFH would like to see it as possible. I was originally thinking of gluing thin bead board to the overhead and running beams perpendicular to the beads. Now after further considering weight, difficulty and time, I'm thinking of either fairing and painting, or possibly gluing up some canvas or similar material to help hide imperfections as there will likely be many. I still plan to install beams to help stiffen and improve appearance. The cabin trunk will be covered with a wood veneer and the remainder of the inside of the hull (ceiling) will just be painted with interlux one part poly (white). I then plan to build a small cabinet to starboard and a seat to port. I am thinking of constructing the cabinet of marine plywood and some sort of pretty wood trim. Where the plywood contacts the hull I will attach with glass and epoxy. There will be a sardine woodstove forward of the starboard cabinet as well, on a metal lined platform that brings the top of the stove to the level of the cabinet. This is all somewhat to LFH's specs. Please tell me of your tips, advice, criticism and experiences with similar projects. I have pictures I could post, but am not sure how to on this forum. Thanks. -Bryan
[/img]
User avatar
Rachel
Master of the Arcane
Posts: 3044
Joined: Tue Dec 07, 2004 7:59 pm

Post by Rachel »

I think photos would be a great help in soliciting comments. Here are some helpful instructions:

http://plasticclassicforum.com/viewtopic.php?t=4068

Rachel
David

Post by David »

A nice way to handle the cabin overhead is to glue furring strips to the underside of the cabintop, cut white Formica panels to fit and hold the panels in place with battens finished bright screwed into the furring stips. I'm in the process of doing this on my boat.

In the spirit of Herreshoff, the cabin would resemble one of the smaller Morris Yachts (or the older Bristol Yachts): white panels and bright wood trim.

Good luck with her,

David
Hirilondë
Master of the Arcane
Posts: 1317
Joined: Thu Dec 28, 2006 8:50 am
Boat Name: Hirilondë
Boat Type: 1967 Pearson Renegade
Location: Charlestown, RI

Post by Hirilondë »

Lots of ways to dress up an interior. But if you really want to resemble how LFH did it, (by this I mean the original wooden version) the interior is very spartan. The boat was a day sailor. Not saying you have to do the same, but the original had 2 simple settees, exposed frames, floor boards below (just like in the cockpit), and not much else. An associate carpenter friend of mine has an original, and he changed nothing.

So if looking as LFH would do it is your goal, you will probably be tearing stuff out and replacing it with nothing.
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
David

Post by David »

You are probably familiar with this site. It is a restoration of a fiberglass version. He did a very nice interior.


http://www.carlsondesign.com/ros.html
Figment
Damned Because It's All Connected
Posts: 2847
Joined: Tue Apr 08, 2003 9:32 am
Boat Name: Triton
Boat Type: Grand Banks 42
Location: L.I. Sound

Post by Figment »

Black topsides were a mistake on that hull, but I'm a sucker for details.

Image
Rozinante
Bottom Paint Application Technician
Posts: 10
Joined: Sun Feb 15, 2009 4:29 pm
Location: Cotuit, MA

Post by Rozinante »

Where are you in Oklahoma. I'll be in Norman for a couple weeks in March, I'd love to see her in person.
Post Reply