The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...
The No.2 on my mast has this spring-piston pawl arrangement, and the base and cap have these sloped-dish receivers to match.
Was this some kooky thing Merriman tried for a while and abandoned (witness elongated/cracked cylinder on the right side in pic #1 above), or was it something specifically intended for mounting to a vertical surface?
Figment wrote:Was this some kooky thing Merriman tried for a while and abandoned (witness elongated/cracked cylinder on the right side in pic #1 above), or was it something specifically intended for mounting to a vertical surface?
Looks just like the mast winches I pulled off the Concordia 31 mast I am repairing just this very afternoon. I can only guess it is an older winch.
edit: add picture
Seems the mast had one of each. Now I can't even guess why the evolution in design
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
-------------------------------------------------------------------------------------------------------------------------------------------------------------------- Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.