screens

Ask a question...get an answer (or two).
Post Reply
windrose
Candidate for Boat-Obsession Medal
Posts: 302
Joined: Mon Nov 24, 2003 8:50 am
Location: Shady Side, MD

screens

Post by windrose »

MD's state bird is the mosquito, I saw one carry off the neighbors dauchshound. Screens for all opening ports are a must. How have folks installed them on the small opening ports on the coachroof front and sides?
You know, the ones that leak all the time and get the cushions wet.....
s/v Wind-rose
Pearson Triton #215
West River, Chesapeake Bay
User avatar
Rachel
Master of the Arcane
Posts: 3044
Joined: Tue Dec 07, 2004 7:59 pm

Post by Rachel »

Wait a minute: I just left the state that claims the Mosquito for its state bird, and now you're talking about dachsund-eating skeeters? This was not mentioned in the "Land of Pleasant Living" brochures!

On the other hand, although it was only about 40 degrees here at noon yesterday, that was 57 degrees warmer than the temperature at the exact same time in Duluth. (How to make 40 sound really warm.)
Mark.Wilme
Candidate for Boat-Obsession Medal
Posts: 340
Joined: Tue Jun 20, 2006 8:35 pm
Location: MA and RI

Post by Mark.Wilme »

I was down the boat today and it was 23 degrees - I swear the bottle of Poland Springs in my lunch began to freeze.

We bought a screen for the companionway hatch that has lead shot sewn in the edge, you just drape it around the edges and tie it off - it works great, I recall it was about $50. Bugbuster or something I think.


EDIT - yep, this is what we bought.


http://www.defender.com/product.jsp?pat ... &id=147075

Image
Mark.
S/V Calypso. 2001 Beneteau Oceanis 381
Image
Not quite a plastic classic yet
dasein668
Boateg
Posts: 1637
Joined: Thu Apr 03, 2003 9:09 am
Boat Name: Dasein
Boat Type: Pearson Triton 668
Location: Portland, Maine
Contact:

Post by dasein668 »

bhartley
Skilled Systems Installer
Posts: 164
Joined: Mon Nov 21, 2005 3:13 pm
Boat Name: Ariel Pyxis
Boat Type: Sea Sprite 23 Cape Dory 25D
Location: Wolfskin Georgia

Me too...

Post by bhartley »

I used brass chain for the weight. Super cheap at Home Depot.
Ric in Richmond
Boat Obsession Medal Finalist
Posts: 518
Joined: Fri Sep 09, 2005 12:26 am
Boat Name: Andiamo
Boat Type: Alberg 35
Location: Richmond VA

Post by Ric in Richmond »

baby stroller net with some weight added would work . and a baby stroller net is about $5.00.

We use ours on our hatch and the elastic holds it fine.

Any baby store should have some over near the strollers.
Ric Bergstrom

http://andiamoadventures.blogspot.com/

Archived old blog:

http://andiamo35.blogspot.com/

~~~~~([\~~~([\~~([\~~~~~~([\~~([\~~~~~~
~~~~~~([\~~~~~~~([\~~~~~~~~~~~~~~~
windrose
Candidate for Boat-Obsession Medal
Posts: 302
Joined: Mon Nov 24, 2003 8:50 am
Location: Shady Side, MD

Post by windrose »

Thanks Guys. Have you guys that own Tritons put screens in the opening ports in the wet locker/head area, v berth and coach roof portlight openings? Did you simply run the screening under the gasket and pull that all snug? Did you use an adhesive to help hold it in place?
s/v Wind-rose
Pearson Triton #215
West River, Chesapeake Bay
dasein668
Boateg
Posts: 1637
Joined: Thu Apr 03, 2003 9:09 am
Boat Name: Dasein
Boat Type: Pearson Triton 668
Location: Portland, Maine
Contact:

Post by dasein668 »

I think the screen under the gasket would probably work. I haven't done it since in Maine it's usually fine to close those ports by the time the bugs are out. It usually gets plenty cool in the evenings.
bcooke
Master of the Arcane
Posts: 2272
Joined: Sat Oct 04, 2003 10:55 pm
Boat Name: Jenny
Boat Type: 1966 Pearson Triton
Location: Rowley, MA
Contact:

Post by bcooke »

I went the cheap route and cut pieces of tent screening big enough to cover the the openings with rubber bands around the edges to secure them. It works, it is ugly, I would like to change them for fitted screens that slide into the oval shapes someday. I envision a stiff wire frame with the screening attached somehow.

I have used the same fine tent screening with velcro sewn into the edges in past boats but for the Triton I splurged and built a teak frame with screening sandwiched in between that slides into the hatch board slots. A box type cover goes over the foredeck hatch.

-Britton
-Britton
Work is overrated.

Most everything you read on the Internet is wrong.

The Website
The Blog
Post Reply