Bluenose wrote:Well they are a bit different but also a bit similar. My Bluenose definitely comes from a racing heritage and their under bodies vary a bit as shown below.
You're quite right, of course, and I had almost edited my post afterwards when I realized that. Thanks for putting it so diplomatically!
The keels are completely different, as you say, and the boats are quite different in many other ways, too, of course. I did see a family resemblance, maybe an impression of the sheer, I suppose, and the similar colour scheme sort of reinforced that. I imagine McVay was "influenced" by the look of the Bluenose, and his experience with building them - that might have been a better way of putting it?
Bluenose wrote:Your Eastwind has a respectable amount of sail area. So I say pitch the outboard and forget the diesel. For the savings buy a new full battened mainsail, a great over lapping Genoa (even roller furling if you need to) and a big Asym to tack to your bow. The diesel and all its gear might be 10 to 15 percent of your weight which might cost you over an inch in sunken waterline. She has a nice shallow draft so you could sail her in and out of anywhere. I have found that the most difficult part of sailing without an engine is deciding to.
Pitch the outboard, for sure! (That was an add-on to get her to Montreal from Buzzard's Bay via New York, the rivers, the canals, and so on.)
Kudos to you, I think engines can be a quite a distraction: I give myself a little "star" in the logbook any day that I don't use it. (I have also found I can propel the boat surprisingly well at close quarters just by wagging the rudder). I am "pretty sure" this boat would be suited to sweeps or a sculling oar, but that has been just idle speculation to this point.
The diesel has been an ongoing project. It was missing when I bought the boat, but I got lucky and found an engine of the original type (Volvo MD1). I've (mostly) rebuilt it, and learned enough in the process that I am keen to keep on. Many of the Eastwinds have lost their inboards by now, so it's sort of a "restoration".
A new mainsail is definitely in the cards, since the existing one is original (1966)! The jib on the roller is a high-cut yankee (about 110%), which I really like. I have a reacher, a spinnaker, and a storm jib, so pretty well set for foresails at this point.
It's very nice to see your Bluenose going strong, I'll try and get some pictures of the Eastwind
sailing one these days!